Rubber Boots Water Permeability Testing Machine , Socks Waterproof
The machine is inflatable method and immersion method to test the
rubber surface of the shoes (boots) of the seal.
During the test, the test piece is sealed with a local pressure
fixture, and the test piece is brought into the water with the
specified depth by the fixture. At the same time, the test piece is
filled with constant pressure air, and bubbles will be generated
immediately as the test piece seeps into the water. Test the number
of seconds, the fixture automatically with the specimen surfaced.
The test shoe boots mouth seal, filled with quantitative air
immersed in water, the water surface and shoes (boots) mouth less
than 75 mm, after a period of time, observe the shoes (boots)
surface bubble formation.
Immersion method: The test shoes (boots) immersed in water, so that
the surface of the shoes and boots (boots) distance less than 75
mm, after a period of immersion, remove and check the shoes (boots)
infiltration of water.
The machine can be placed on the production line, the entire
product seized to fully control the waterproof quality of the
|Number of test pieces||2 pcs|
|Clamp clamping length||220 mm|
|Fixture up and down travel||320 mm|
|Sink size||420 × 420 × 320 mm|
|Timer||LED display, 0 ~ 999 s|
|Air pressure||0 ~ 50 kpa (The customer prepared the air compressor)|
|Dimensions||1250 × 550 × 1550 mm|
|Power||AC 220V, 50 Hz|
According to the standard: EN ISO 20344